New Scott grips and Honda Handgrip Cement ready to be put to use.

The first step was to cut the old grips off.

Once the old grips were cut I could easily peel them off.

These grips had seen their better day... for sure.

The throttle pipe had quite a bit of glue residue on it.

I used a fine steel wool to clean the old glue off.

The new Scott grips have a "front" indicator/arrow on the end.

You have to work pretty fast with the Honda Handgrip Cement. It sets up quickly.

Once glued in place I safety wired each grip.

The tips of the wire are pushed into the grips so they don't get hung on my gloves.

Here's a close up of the left side before and after...

...and full shots, before and after.